Large Format Cutting Transport and Finishing Tools

Raimondi Support Cylinders for raising tile/slab 2.25 inches above the aluminum worktop of the Work Bench (with the slot on the rail). This helps perform cuts with an angle grinder in every direction without touching the aluminum worktop of the Work...

Large Format Tile corner protector for tile thickness from 1/8" to 1/2". Tile corner protectors for use handling large format tile 1/8" to 1/2" thick. Pack of 4 protectors.

Large Tile Format A Frame Cart for transport and handling of large format tile. NEW lightweight cart (45lbs). Transport and handle large format tiles using either sides of the cart. Easy to use for 'back-buttering' tile. Easy access for suction cups from...

Large Format Tile Closer device to align tile large format. Large tile slab or panel 120" x 60" once positioned are hard to move in order to bring it closer to the adjacent slab or panel. The large format tile Closer is a device to address this issue. By...

e-Fox Cordless Vibrator is essential to eliminate the air that can be trapped under the large format tiles during installation. If these air pockets are not removed, once the adhesive cures, the air will create a vacuum that makes the slabs / tile sheets...

Raimondi vacuum circuit device engages up to eight (8) suction cups simultaneously. Push a button and the vacuum levels will raise on all suction cups connected to the circuit. Should a cup loose pressure the remaining cups will stay engaged. Works with...

Raimondi TYRELL compact cart for transporting large format tile. Transport and handle large format tiles. TYRELL is capable to move around uneven surfaces. Lined with a wooden support to hold large format tiles. Maximum stability and maneuver with six...

ONLY-ONE device is designed to assist installation of large format tiles. This device allows for single-operator to collect large format tile. Transport large format tiles, back-butter and lay down to install. Suitable for tile thickness from 3mm up to...

Raizor Power Cutter W/Electric Grinder and Blade is a universal multi-angle cutting unit. Angle grinder used in combination with TC10RAIZOR. Plunge cut to adjust the depth of the cut. Tilting movement. Square or rectangle knock-out cuts. 90° and...

Easy-Move 150 is a pair of handling devices with fixed length profiles and four (4) vacuum suction cups free to tilt and pivot. The 4 vacuums gauge 7" suction cups come with gauges and stain-free rubber. The pump system, tilting suction cups can be used...

7" Vacuum Suction Cup by Raimondi with replaceable vacuum gauge and stain-free rubber. The Raimondi RV 175: “vacuum” pump suction cup with vacuum gauge designed for handling textured ceramic tiles and slabs. Guarantees perfect grip even on...

EASY-MOVE With 8 RV175 Vacuum Suction Cups and 2 Crossbars Minimum Slab Length 3.3 feet Maximum Slab Length 10.5 feet. Fourth edition full frame Easy-Move. Ideal solution for safely handling large format tile. Stain free 7" diameter vacuum suction...

Easy-Move bars with 6 suction cups. Minimum Slab Length 3.3 feet Maximum Slab Length 10.5 feet. Fourth edition EASY-MOVE telescopic bars. Ideal solution for safely handling large format tile Stain free 7" diameter vacuum suction cups. Use on...

Raimondi 1/2" (12mm) Radius Shaping Wheel Half Bullnose has a 20mm arbor hole to be used with 5" angle grinders. Use only with POWER-RAIZOR (TCPWRAIZA / TCPWRAIZBU) and RAIZOR RAILS (TC10RAIZOR). *Caution without the RAILS and miter...

Raimondi 3/8" (10mm) Radius Shaping Wheel Half Bullnose has a 20mm arbor hole to be used with 5" angle grinders. Use only with POWER-RAIZOR (TCPWRAIZA / TCPWRAIZBU) and RAIZOR RAILS (TC10RAIZOR). *Caution without the RAILS and miter...

Raimondi 1/4" (6mm) Radius Shaping Wheel Half Bullnose has a 20mm arbor hole to be used with 5" angle grinders. Use only with POWER-RAIZOR (TCPWRAIZA / TCPWRAIZBU) and RAIZOR RAILS (TC10RAIZOR). *Caution without the RAILS and miter box as guides the...

Raimondi Stand Alone Tile Clamps can be secured on the work bench for optimal working capacity. Set of 2 work bench holders.

Power Raizor Water Feed System for cooling and dust suppression. Water improves your finish with quicker cuts and less chipping. Capacity of 8 liters (1.75 gals) with relief valve. Wet cooling device to be used in combination with POWER RAIZOR and...

Perform 45 degree cuts with fast and precise mitering. No rail required. Use with 4.5" cutting blade with no length limit. The two handles to allow the necessary pressure with knob calibration for adjustment and anti-scratch plastic slides. Can be used...

Power Raizor Box unit only does not include the Grinder or Blade not included. Raizor universal multi-angle cutting box with Raizor cutting guide (TC10RAIZOR) is recommended to be used with proper GFCI protection around water. Angle grinder (Angle...

Raizor for large format cutting with scoring wheel and rail. Scoring and snapping rail system. Lightweight and easy to use (20 lbs.) Two 5.5 ft. rails connect together. Three (3) stain-free suction cups. Die-cast cutting unit. Fine adjustment and precise...

Tip-Top clamp for mitering large format tiles. Pair of miter clamps. For stair and counter top joining. Two (2) suction cups per clamp. Adjustment knobs for horizontal and vertical adjustments. Material thickness 1/8" to 1-3/16". Pair of miter clamps...

Raimondi Work Bench Plus for large format tile handling. Expandable Width Connectable Work Bench 6' x 3' to 6' x 5' for large format. Steel structure. Anodized aluminum surface. Extendable slats for wider work bench. The bench extends its slats to...